No More Bottles

---

The AM10 has an internal water storage capacity of 38 litres. This means that the AM10 will constantly produce water out of the air until its internal water storage tank reach 38 litres. Once this storage capacity is reached, the AM10 will automatically switch into standby mode where water production will be temporarily be paused. Once water is drained out of the unit and the water level falls below 35 Litres the AM10 will start producing water until storage capacity is reached once again.

• Eliminates need for bottles.
• No more heavy lifting.
• No more wasting space for bottles storage.
• Eliminate liability for bottle related injures.
• No more bottles ending up in landfills.
• Eliminates the thousands of bottle delivery trucks off the streets to decrease pollution and traffic.
• Eliminate plastic taste of bottle.
• Eliminates need for cleaning dispensers.
• Do not have to adjust your drinking habits with your bottlers’ delivery dates.
• Only pay for the water that you drink.

Why continue paying for water for the rest of your life when you can make it out of the air?

“Water Contamination by your Bottle Dispenser”

Most people do not know that their water dispensers such as Ozarka systems need to be cleaned. The bottled water is clean but what about the dispenser in which the water must travel through before it reaches your glass.

Many bottled dispenser company clearly states in their manuals that the dispensing units should be cleaned every three to six months. The cleaning procedures for Ozarka units are as follows:

• Place boiling hot water in the bottle placement area.
• Use a brush to scrub the inside walls where the bottle usually lay.
• Empty the water using the cold water drain.
• Refill bottle placement area with water.
• Empty the water using the cold water drain.

Most people do not realize that this cleaning is necessary because these units can become dirty and slimy. When bottles are being stored they accumulating dirt and dust on top neck which are later being placed directly into the water dispensers. In addition, most people grab the neck of the bottle when placing them into the dispensers. Well, with this they transfer over the germs from their hands onto the bottle neck which is then placed directly into the dispenser. Bacteria and slime form onto the sides of this dispensing area and multiple until someone cleans this area. This is preciously why it is clearly stated that these dispensers need to be cleaned every three to six months.

So the next time you are changing your bottle or come across a water dispenser run your finger on the inside rim of the bottle placement hole and see for yourself.

Tested by USA & Australian Water Analytical Labs to be safe drinkable pure water
COPYRIGHT © 2000, Aquamaker. ALL RIGHTS RESERVED.
TOLL FREE 1300 85 33 27
General Enquiries info@aquamaker.com.au
Sales Enquiries sales@aquamaker.com.au
Phone: +618 9371 2553 Fax: +618 9371 2553